CoMo／Al_2O_3和CoMo／TiO_2－Al_2O_3加氢脱硫催化剂的研

研究了ＣｏＭｏ／Ａｌ２Ｏ３和ＣｏＭｏ／ＴｉＯ２－Ａｌ２Ｏ３催化剂的加氢脱硫性能，并用ＬＲＳ，ＸＲＤ和ＴＰＳ等方法表征其表面相结构和硫化行为．结果表明，以ＴｉＯ２－Ａｌ２Ｏ３为担体的Ｍｏ和ＣｏＭｏ催化剂的活性均比相应的Ａｌ２Ｏ３为担体的高；少量Ｃｏ，Ｎｉ助剂的引入可显著提高ＭｏＯ３在担体上的分散度和改进催化剂的活性；Ｃｏ助剂还有降低Ｍｏ物种硫化温度的作用．     

Interaction of gas phase atomic hydrogen with Pt(111):Direct evidence for the formation of bulk hydrogen species

Employing hot tungsten filament to thermal dissociate molecular hydrogen,we generated gas phase atomic hydrogen under ultra-high vacuum(UHV)conditions and investigated its interaction with Pt(111) surface.Thermal desorption spectroscopy(TDS)results demonstrate that adsorption of molecular hy- drogen on Pt(111)forms surface Had species whereas adsorption of atomic hydrogen forms not only surface Had species but also bulk Had species.Bulk Had species is more thermal-unstable than surface Had species on Pt(111),suggesting that bulk Had species is more energetic.This kind of weakly- adsorbed bulk Had species might be the active hydrogen species in the Pt-catalyzed hydrogenation reactions.     

Effect of adsorption of vapours on the electrical conductivity of some polyene semiconductors: adsorption and desorption kinetics

The change in semiconductive properties of β-apo-8′-carotenal, astacene and methyl bixin on adsorption of various vapours on the crystallite surfaces has been studied at a constant sample temperature. The adsorption of vapours enhances the semiconductivity of the polyenes appreciably. This enhancement depends on the chemical nature and also on the pressure of the adsorbed vapour. The adsorption and desorption kinetics follow the modified Roginsky-Zeldovich relation. A two stage desorption process, the first stage of which gives a Lennard-Jones potential energy curve and is followed by a rate-determining transition over a potential energy barrier to the second stage of adsorption forming weakly bound complexes between the vapour molecules and the polyene crystallites, can explain satisfactorily the experimentally observed kinetic data.     

Stability of workroom air volatile organic compounds on solid adsorbents for thermal desorption gas chromatography

The storage stability of the occupationally frequently occurring compounds, methylethylketone, methylisobutylketone, benzene, toluene, tetrachloroethylene, n-butylacetate, -pinene, β-pinene, limonene and n-decane, has been investigated on the adsorbents Tenax TA, Chromosorb 106 and Carbotrap using thermally desorbable tube type samplers, commonly utilized in ambient and workroom atmospheric measurements. Fifty and 500 ng of each compound were loaded on the various adsorbents tubes, stored at both ambient (20 °C) and refrigerated (4 °C) temperatures and analysed by means of thermal gas chromatography with mass spectrometric detection on days 0, 7, 14 and 28 after exposure. A 90% storage recovery was chosen as acceptance criteria for storage stability, and statistical testing by Student's t-test, analysis of variance and Bonferroni post hoc tests were employed to investigate the effect of the categorical variables storage time, storage temperature and analyte loading on the different adsorbents. Chromosorb 106 showed the overall best behaviour with recoveries of 90% or better for all analytes during the 28-day test period. Tenax TA and Carbotrap yielded lower recoveries and were more influenced by variations in storage time, storage temperature and analyte loading. Refrigerated temperatures were best avoided for storage on Tenax TA, but may increase the recovery of some compounds on Carbotrap (e.g. n-butylacetate). The blank build-up on the adsorbents was also investigated, and Carbotrap and Tenax TA showed no signs of artefact development over time. Chromosorb 106, however, contained inherently more artefacts that build up over time, which in spite of the excellent storage capability, may limit its use in field studies where long storage times are normal.     

Adsorption of triethygermane on Si(100): thermal and nonthermal channels for ethyl ligand removal/dissociation

Adsorption of triethylgemane (TEG) on the Si(100) surface at 100 K has been studied using a variety of surface‐sensitive spectroscopies. Thermally and electronically desorbed species were analyzed using temperature‐programmed desorption (TPD) and electron‐stimulated desorption (ESD) techniques. Electronically desorbed ions (H⁺) were analyzed using a time‐of‐flight technique (TOF) and time evolution studies were conducted on desorbing neutral species. Direct analysis of surface species were carried out using X‐ray photoelectron spectroscopy (XPS) and high‐resolution electron energy loss (HREELS) spectroscopy. Evidence is offered for (1) an electron‐induced channel for direct ethylene desorption via a β‐hydride elimination process; (2) an electron‐stimulated transfer of ethyl ligands from a Ge to a Si site; and (3) both thermal‐ and electron‐stimulated desorption of methyl groups. Copyright © 2006 John Wiley & Sons, Ltd.     

Selective desorption and analysis of humic substances on suspended particles in river water

The elemental analysis and morphology of individual particles indicate that the dominant suspended particles in river water are kaolin covered with hydrated iron(III) oxide which strongly sorbs humic substances. Suspended particles, about 1 mg, collected from 250 ml of water by centrifugation, are treated with 0.7 ml of 0.1M sodium hydroxide to desorb humic substances. Approximately 60% of copper and 30% of lead on or in suspended particles exist as humic complexes.     

Unraveling the mystery of efficacy in Chinese medicine formula: New approaches and technologies for research on pharmacodynamic substances

Traditional Chinese medicine (TCM) is the key to unlock treasures of Chinese civilization. TCM and its compound play a beneficial role in medical activities to cure diseases, especially in major public health events such as novel coronavirus epidemics across the globe. The chemical composition in Chinese medicine formula is complex and diverse, but their effective substances resemble “mystery boxes”. Revealing their active ingredients and their mechanisms of action has become focal point and difficulty of research for herbalists. Although the existing research methods are numerous and constantly updated iteratively, there is remain a lack of prospective reviews. Hence, this paper provides a comprehensive account of existing new approaches and technologies based on previous studies with an in vitro to in vivo perspective. In addition, the bottlenecks of studies on Chinese medicine formula effective substances are also revealed. Especially, we look ahead to new perspectives, technologies and applications for its future development. This work reviews based on new perspectives to open horizons for the future research. Consequently, herbal compounding pharmaceutical substances study should carry on the essence of TCM while pursuing innovations in the field.     

Controlled-rate thermal analysis

Controlled-rate thermal analysis (CRTA) and differential scanning calorimetry (DSC) were used to investigate the adsorbed water layers and the surface properties of different commercial activated carbons. A simple method is proposed to obtain information on the properties of the adsorbed water film and the surface heterogeneity of the materials studied. This method utilizes TG mass loss and the first derivative of the DTG mass loss curves with respect to temperature and time, obtained during programmed liquid thermodesorption. The obtained TG mass loss curves, which reflect the energetic heterogeneity, consisted of steps and inflections which were associated with the mechanism of wetting of the solid surfaces. The heights of these steps and inflections depend on the adsorption capacity, the adsorption potential and the nature and number of the active centers of the carbon samples studied. The values of the total porosity and the surface phase capacity obtained by this method are in good agreement with those estimated on the basis of independent methods. The behaviour of water/carbon samples was studied by means of DSC at subambient and elevated temperatures. The experimental results provided novel data on the structural heterogeneity, the thermal stability of the water/carbon interface and its phase and structural transitions.Support from the Research Council of Kent State University (Ohio, USA) is acknowledged. The author is pleased to thank Drs M. Jaroniec, R. K. Gilpin, J. Choma and R. Dobrowolski for fruitful discussions and the active carbon samples.     

MoO3—SiO2表面复合物金属催化剂载体的制备与表征

采用ＭｏＯＣｌ４的盐酸溶液负载于ＳｉＯ２的表面反应法，制备了负载型和键联型两种ＭｏＯ３－ＳｉＯ２（ＭｏＳＯ）表面复合物载体。利用红外光谱法研究了ＭｏＳＯ的表面构造及其化学吸附性能；并利用ＴＰＲ技术考察了该表面复合物载体对负载金属Ｐｄ，Ｃｕ氧化物还原过程的影响。     

Polymer drying. VI. EPR spin-probe studies on swelled poly(styrene-co-divinylbenzene)

The electron paramagnetic resonance (EPR) signal and the residual number (α_t) of volatile molecules per phenyl group of poly(styrene-co-divinylbenzene) in samples that had been swelled to saturation in a dilute solution of a nitroxide spin-probe (TEMPO or 4-oxo-TEMPO), dissolved in a volatile liquid, were monitored simultaneously as the system containing excess liquid was allowed to evaporate to dryness. The results showed that the characteristic motionally narrowed three-line EPR spectrum began to change when α_t became equal to α_g (the number of sorbed molecules per phenyl group of polymer at liquid-saturation). The ratio of the intensity of the low-field and high-field hyperfine peaks relative to the middle peak decreased monotonically to an asymptotic limit that was attained when α_t became equal to α_g (the number of residual adsorbed molecules per phenyl group of polymer at completion of the transition from the rubbery state to the glassy state). The EPR hyperfine pattern, from which the rotational correlation times were estimated, changed most significantly as α_t decreased from α_G to α_g while exhibiting inflections at about α′_s and α′_g the compositions that mark, respectively, incipient desorption of adsorbed molecules and incipient transition from the rubbery state to the glassy state. The pattern between these inflections points, however, varied with the affinity of the solvent for the polymer.